Want to know what fireplace heating now more appropriate?
What the fireplace is suitable heating now?
No doubt, is necessarily fireplace, when the normal work of the fireplace chimneys, the burning flame will produce updraft, the burning may produce similar to carbon monoxide, chlorine and other harmful gases removed.
And if these gases during combustion is not fully will be scattered to the indoor air.
Sometimes, will produce a shift in the opposite direction airflow, makes the house full of smoke and toxic gases.
Such return air are mostly due to inadequate combustion, so the culprit and chimney caused by blocking or differential pressure.
A chimney rising hot air how work is depends on whether the key to good operation.
When we are in front of the heating which fireplace is suitable the question now no time to linger, as accessories that on the one hand, consider a chimney, burning more fully, the fire, the faster the hot air rises, chimney work is the better the results.
The rising of hot gas from the fire will generate a kind of communication with other gas in the interior of motion, the air flow from the environment around the fireplace, when air meet fire, the air will provide the required oxygen flame combustion, the flame will be heated air, let its cycle, cycle.
The air in the air by the movement of the chimney is due to the housing more heat than outdoor air.
Warm air rising trend to promote its through the wall and roof (
Cracks, such as Windows, doors, etc.
Overlay of housing of the fact that hot air rising regional air pressure is different.
In a cold area,
Usually in low areas of the house)
, the pressure is low, and gathered the hot air area of high pressure.
The lower area of the air pressure may be lower than atmospheric pressure, and if the fireplace is located in one of these areas, the chimney may produce permanent air subsidence phenomenon.
By putting a hand on the chimney wall and induction air sport, you should be able to feel the feeling.
Once appear similar phenomenon, can be in the fireplace in the bedroom opened the window to remove this reverse air flow, and pressure.
The harmful material in a chimney problem of creosote accumulation may cause the formation of the rising air, as a result, smoldered air and flue gas to flow backward into the room.
This suggests that it is time to clean chimney, don't blindly persistent what fireplace is suitable for heating now this proposition, we should pay attention to more about fireplace key to the selection of the accessories and debugging, if your chimney in low installation position, or chimney height itself is not enough, you may also encounter reverse flow, larger need higher chimney flue size to produce good updrafts.
In addition, the chimney opening obstruction (
Such as the hanging branches or adjacent buildings)
May interfere with the formation of updraft.
The solution here is to improve the stack height or to select installation location.