Over 10 years professional experience on electric fireplaces & home lighting products

Floor lamp cleaning and maintenance tips can prolong service life

by:Longjian     2020-10-17
Because floor lamp is easy to move, and is suitable for matching furniture put, in the use of more and more common in household, then you know how to clean the floor lamp? Know how to maintain floor lamp? Below small make up just about floor lamp of cleaning and maintenance tips in their daily lives. Floor lamp cleaning method: 1, if non-metallic for lamps and lanterns, can use wet cloth to wipe, lest dirt build-up, affect the lighting effect. 2, floor lamp and maintenance is the key to moistureproof, especially in the bathroom, the lamps and lanterns of the bathroom and the kitchen stove headlights, all want to install the dampproof lampshades, in order to prevent moisture intrusion, avoid corrosion damage or leakage phenomenon such as short circuit. 3, clean up the floor lamp shade, with a clean a feather duster sweep off the dust off and gently don't let the chimney deformation. Chimney easily easily lead to accumulation of ash layer darker, so always clean chimney. 4, can't rinse the lamps and lanterns, as long as can wipe with dry dishcloth touchs water, dry, if accidentally run into water to try to avoid by all means after turn on the light immediately with a damp cloth to wipe. Floor lamp maintenance skills: 1, moisture - — Electrical items most concerned about is damp, can reduce the service life, both will have electricity, so the key to the floor lamp maintenance step is moistureproof, whether it's sitting room place, or toilet lighting, bathroom and kitchen stove headlights, to install good moistureproof lamp shade, prevent moisture intrusion, led lamps and lanterns corrosion damage or leakage short circuit, etc. 2, dust - — Floor lamp maintenance also often dust processing, especially the floor lamp of chimney, chimney easily easily lead to accumulation of ash layer darker, affect the lighting effect, so often should clean. Clean up the floor lamp shade, with a clean a feather duster sweep off the dust off and gently don't let the chimney deformation. 3, do not frequently switch - — Do not frequently switch used lamps and lanterns, because the lamps and lanterns at the instant of the frequent start, through the filament current is greater than the normal work of electric current, the filament temperature rise sharply accelerated sublimation, which would greatly reduce its service life, so try to minimize the switch of lamps and lanterns.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...