Flush Light Supplier, Flush Mount LED Lights

PRODUCT PARAMETERS

Dimensions & Weight					Materials & Finish
product Dimensions	mm		Inch		Material	steel
Height	160		6.30		Finish	Satin Silver / Oil rubbed bronze / Antique Brass / Chrome
Width or Diameter	350		13.78
Depth or Ext			0.00		Electrical
Weight	1.7	Kg	3.74	Lbs	Safety Level	Class I
					Lampholder	E27
Packing & CBM					Lamp Type	Candle
Is it The KD Packing	NO				Wattage	2 X 40w
Inner box( Reference Only)	mm		Inch		Switch/Dimmer
Width	360		14.17		Operating Voltage	220-240V 50/60Hz
Depth	360		14.17		Lamp Included	No
Height	180		7.09		Lumens
Weight	2.1	Kg	4.62	Lbs	Colour Temperature

Outer box( Reference Only)	mm		Inch		Lamps Shade
Width	750		29.53		Shade Type	Glass
Depth	375		14.76		Shade Finish	opal/Clear
Height	585		23.03		Shade Size	mm	Inch
Weight	13.7	Kg	30.03	Lbs	Height	100	3.94
Pack Qty	6			Pcs	Width or Diameter	285	11.22
Cube/Pcs & 40'Cont Qty	0.165	CBM	2106	Pcs	Depth or Ext		0.00

PRODUCT INTRODUCTION

The classic double-ring structure ceiling lamp, the re-customized ring and glass shade, shows a variety of different situations.

Opal glass with ORB lamp body is suitable for traditional American space.

Clear glass and Antique Brass lamp body, more exquisite highlight the internal delicate details, suitable for luxury decoration space.

And opal glass plus Satin Silver lamp body, clear glass plus chrome lamp body, suitable for modern living space.

The structure of IP44 frees you from worrying about the use environment. It can be used as long as it has a ceiling.

Suggestions on power range of lighting fixtures

Type of space		Dark place: corridors, stairs, bars, etc	Non-written workplace: lobby, bed room,elevator, market, office, etc.	The environment that has partial illume: living room,bath room,office, kitchen, examination room.	Writing places: program room, Study,reading room, daily environment.	A place for photography
Illumination range：（LX)		20~50	50~150	100~200	200~300	300~500

Light source type	illumination area（m²）	Corresponding to the power range of the lighting fixture
Incandescent	15~18	40W~60W	60W~80W	120W~200W	200W~320W	320W~480W
	30~40	80W~120W	100W~150W	300W~400W	350W~600	550~900W
	40~50	160W~200W	220W~280W	500W~700W	700W~1100W	1200W~1700W
	60~70	200W~260W	300W~350W	700W~900W	1000W~1400W	1600W~2100W
	75~80	260W~350W	400W~450W	800W~1100W	1300W~1800W	2200W~2700W

Compact Fluorescent Lamp(CFL)	15~18	9W~13W	13W~18W	27W~45W	45W~70W	70W~110W
	30~40	18W~27W	22W~34W	70W~90W	80W~140W	120W~200W
	40~50	36W~45W	50W~60W	110W~160W	160W~240W	270W~380W
	60~70	45W~60W	70W~80W	160W~200W	220W~320W	360W~470W
	75~80	60W~80W	90W~100W	180W~240W	300W~420W	500W~610W

LED	15~18	4W~6W	6W~8W	12W~20W	20W~32W	32W~48W
	30~40	8W~12W	10W~15W	30W~40W	35W~60W	55W~90W
	40~50	16W~20W	22W~28W	50W~70W	70W~110W	120W~170W
	60~70	20W~26W	30W~35W	70W~90W	110W~140W	160W~210W
	75~80	26W~35W	40W~45W	80W~110W	130W~180W	220W~270W

Suggestions for bathroom installation

All installations must comply to guidelines which are based on a zonal concept similar to that used for the installation of lighting around swim-ming pools.

Each zone rating (IP) is determined by the degree of risk of electric shock.

Zone 0 This is the area inside the bath or shower basin and is rated at IPx7.

Zone 1 Refers to the area above the bath or shower up to a height of 2.25 metres and carries a minimum rating of IPx4.

Zone 2 Covers an area 0.6 metres wide immediately next to, and all around zone 1, plus the area below 2.5 metres high directly over the bath or shower. Wash basins should also be treated as zone 2. The minimum rating here is IPx4.

Where water jets are likely to be used for cleaning purposes in zones 1 and 2, the rating is a minimum IPx5.

OUTSIDE ZONE Covers any area outside Zone 1 and Zone 2. There is no special requirement in this Zone.

Bathrooms are now allowed to contain a socket outlet, this must be located 3m outside of Zone 1.

Lighting circuits and any socket-outlet circuit in a room containing a bath and/or shower must be provided with 30mA rcd protection.

AREA AROUND SINKS Covers up to 60cm.

Zone 2. IPX4 luminaires should be installed in this Zone.

Suggestions on the Selection of Light Sources

Because the lumen output from different manufacturers will vary.Here’s quick and easy guide to calculate the approximate total lumen output of your fitting.

LONGJIAN

Ten years manufacturing electric fireplaces,just make the professional fires.

QUICK LINKS

PRODUCTS

CONTACT US

Tel : +86-760-22678663
Fax : +86-760-22678662
Email : james.z@longjianelectrical.com
Address : No.1 Linglan Road, Dayan Industrial Park,Huangpu Town, Zhongshan,Guangdong of China

Our products are widely recognized and trusted by users and can meet continuously

changing economic and social needs.

Sitemap

350mm 14” 2 light Ceiling Flush mount ip44 with Glass shade C0009R-2